Light is done in front of a rapidly rotating automatic polishing machine. There are many security techniques to follow. Unsafe accidents are highly likely to occur. The following points should be given special attention.
1. Correctly grasp the gripping method of the workpiece. Hold a relatively large area during operation, making it difficult to catch the hand if it falls off.
2. To prevent foot injuries in case the parts fall off. Both feet must be protected by protective frames during operation.
Automatic polishing machine
3. Never wear gauze gloves during operation. When operating the automatic polishing machine, the contact surface between the fingers and the workpiece must be insulated with a hand cloth and gloves must not be worn to avoid work-related accidents caused by the workpiece wrapping around the gloves.
4. If the workpiece falls off during operation, the automatic polishing machine must be turned off first when picking up. Turning off the machine first is to avoid work-related accidents caused by touching the rotating polishing wheel when picking up.
5. If the workpiece wraps around the wheel during operation, it should be immediately shut down. If the workpiece is not shut down at this time, it may be thrown out and cause work-related accidents. Therefore, in addition to shutting down immediately, it is also necessary to leave the site immediately.
6. In addition to the above points, attention should also be paid to fire prevention during the polishing, oiling, and polishing processes. When polishing, the fuzz thrown off the grinding wheel during the polishing process may be ignited by sparks generated by the polishing wheel and the workpiece during polishing. The wind at the exit propelled the fire. This phenomenon is by no means rare, and we must remain vigilant.
Release paper inspection machine 
Product testing machine 
Alu-Five Bar Pattern 
Polishing machine 
